home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1996 March
/
EnigmA AMIGA RUN 05 (1996)(G.R. Edizioni)(IT)[!][issue 1996-03][Skylink CD IV].iso
/
earcd
/
util2
/
dldiz17.lha
/
DLDiz.doc
< prev
next >
Wrap
Text File
|
1995-04-08
|
8KB
|
233 lines
Welcome to DLDiz v1.7 ©Copyright 1995 by Rasmus K. Ursem, Dreamline Designs.
Release Date: 08-Apr-95
Introduction:
DLDiz is a small utility to extract and show "file_id.diz" from Textfiles,
LHA and DMS-archives. It can also create filelists from the file_id.diz, this
version can supports 2 BBS types (Daydream and AmiExpress). Using this option
you have the fastest local upload tool. More about this later.
DLDiz now supports LZX.
This is BUNGYJUMPWARE. If you like it you should go bungyjumping.
Disclaimer:
I take no responsibility for any lack of data or currupted archives.
(or any bungycrashes...) DLDiz is checked in everyday use and has shown no
errors.
Needed programs:
LHA placed in the path.
LZX placed in the path.
Reason to code: I used Whadiz 1.2 from nocTurne deSign/RefLeX, but this
utility has a major bug. It dosn't unlock files when there isn't any
"file_Id.diz" file in the archive. On top of that it dosn't unlock dirs.
Very annoying because you cannot delete these files and dirs.
Sometimes a list of the file_id.diz's is also very useful, so DLDiz can
now create such a list.
Usage:
DLDiz NAME/K/M,F=FILELIST/S,Q=QUIET/S,NH=NOHEADER/S,LT=LISTTYPE/K,LN=LISTNAME/K,
ED=EDITOR/K
NAME is the name of the archive.
FILELIST is used to enable the create filelist. A file called
"Filelist_created_by_DLDiz" is placed in ram:
QUIET will disable all output but errormessages from DLDiz.
NOHEADER will disable the header output. Only the File_ID.Diz will be
displayed.
LISTTYPE is the type of the list you want to generate.
Currently supported listtypes is:
N This result in a standard list with no sizes, dates ect.
A Generates a list for AmiExpress BBS.
D Generates a list for Daydream BBS.
If this is not found in the commandline, DLDiz will generate a
standard filelist like version 1.5 Did.
LISTNAME An optional listname. The File_ID.DIZ from the file, will be added
to this list specified here.
If this is not found in the commandline, DLDiz will add to the
standard filelist in ram:
EDITOR Editor to use if no File_ID.Diz is found. For the moment this dosn't
work in DMS-Archives because DMS can't add a File_ID.Diz without
repacking the whole file. :(
History
V1.0 -First working version.
V1.1 -Improved: DMS extraction replaced with own search routines.
-Added: Search in textfiles. (Or any other file where the
file_id.diz is between a begin and end file_id.diz line.
-Added: Buffermode so you can get the file_id.diz even if you
havn't enough memory free to load the whole file.
V1.2 -Bugfix: V1.1 had a minor bug. (Colorflash when no file_id.diz was
found.) A friend of mine uploaded v1.1 without asking me. :-(
V1.3 -Bugfix: Major fuckup in the DMS-searching.
V1.4 -Added: Option to create filelist.
-Added: Quietmode.
V1.5 -Bugfix: DLDiz didn't delete the t:File_ID.Diz when a corrupted
archive was processed.
-Added: If a lha fails (corrupted data) DLDiz print a message on
the screen or in the filelist.
V1.6 -Added: LZX support.
-Added: Special list generating for AmiExpress and Daydream BBS.
-Improved: DLDiz can add to a userselected list instead of
ram:Filelist_created_by_DLDiz.
V1.7 -Bugfix: V1.6 would crash on textfiles greater than 65535 bytes.(Ups!)
-Bugfix: DMS search-routine couldn't find the Diz if it was placed
as the last "hunk".
-Bugfix: The listgenerator for Daydream and AmiExpress would create
"funny" lists if the Diz wasn't ending on a CR. ($0a)
-Added: If no file_ID.Diz is found DLDiz can open a userselected
editor and add the File_ID.Diz to the archive. NOTE: This dosn't
work on DMS-archives because DMS cannot just add File_ID.Diz-info.
You have to unpack the file and repack it with the Diztext option.
(Crap?)
-Added: NoHeader option, this will prevent the usual header text from
being displayed. Now you can use DLDiz in connection with upload on
Diz-supporting BBS-systems.
-Added: Rexxscript for use with DOpus. Thanks goes to Morten K.
Andersen for being our Arexx-wizard.
-Changed: In the privious versions you had to type DLDiz Name <File>
Now added a /M so you just have to type DLDiz <file>.
-Improved: The listgenerating-routine now adjust the width of the
file_id.diz.
Using the editor option.
Example:
DLDiz test.lha f ed="ced -keepio"
This will call DLDiz, and if test.lha dosn't have any File_ID.Diz the editor
specicified in Ed= will be executed. In the above example, DLDiz will execute
the following command.
ced -keepio t:File_ID.Diz
If you use some wierd editor that must have the filename as the first argument
you can freely create a script to execute your editor, just remember to set the
S (Script) bit, and keep in mind that DLDiz tries to load the File_ID.Diz from
T:File_ID.Diz.
example of script for use with CygnusEd
-------------- Cut ---------------
stack 8000
Ced t:File_ID.Diz -keepio
-------------- Cut ---------------
Using with DOpus.
*** Normal showing ***
AmigaDOS c:DLDiz NAME {f}
Stack: 4000
Priority: 0
Close Delay: -1
Flags:
Directory Opus to front
Do all files
Output window
*** Generating a list in ram: ***
AmigaDOS c:DLDiz NAME {f} F Q
Stack: 4000
Priority: 0
Close Delay: -1
Flags:
Directory Opus to front
Do all files
Output window
*** Local uploading on Daydream/AmiExpress ***
AmigaDOS c:DLDiz NAME {f} F Q LN {Rf} LT D
\/ \__Specifies Listtype.
\ Here Daydream. Use A for AmiX
\
\______Tells Dopus to pop a filereq.
Here ou select the list you
want to add to.
Stack: 4000
Priority: 0
Close Delay: -1
Flags:
Directory Opus to front
Do all files
Output window
Local upload on Daydream and AmiExpress.
If you have Dopus do as described just above, else do this:
c:DLDiz NAME <filename> F Q LN <Listname> LT <Listtype: D = Daydream, A = AmiExpress>
1STNOTE: The archive/file MUST have a FILE_ID.Diz, else the Discription will be
"File_ID.Diz NOT found!"
2NDNOTE: You must copy the files to the path according to the selected list.
3RDNOTE: Remember these BBS-programs MUST have the names in uppercase and
the filename MUST support the 8.3 (PeeCee) standard.
*** Using the arrex script with DOpus ***
This script is used for local uploading/creation of filelists. Use these
settings:
ARexx rexx:dopus/DLDListgenerator.dopus
Stack: 9000
Priority: 0
Close Delay: 0
Flags:
Run asynchronously
How to contact the author.
Snail mail (@, -mail)
Rasmus K. Ursem
Vittenvej 26
8382 Hinnerup
Denmark
Phone +45 86910058
FidoNet: 2:238/28.10
AmigaNet: 39:140/109.10
HOANet: 10:2/9.10
Or Call this board:
Stargate, Dreamline Designs BBS Phone: +4586910058 Hours: 21:00-09:00
Sysop: Rasmus K. Ursem, Dreamline Designs.
Some Notes about this BBS:
All releases from Dreamline Designs is online, even the winner-demo from
the dealer-demo-competition at TP3 (22MB). Furthermore I am trying to build a
collection of coding utilities and public sources such as chunkytoplanar-
routines and other demo-routines/utilities-sources.
Other Utils coded by me:
DLDCheck: The *ultimate* stripper, with intelligent killmode to strip
randomgenerated adds, CRC-Checking(=ANY banner can be deleted).
latest release is V4.1.
DLDBoot: HD-Bootprogram to wait for old slow hds.
DLDInfo: Improvement to CBMs info.
DLDModRe: Rename (unpacked) Protracker modules to the original name.